Allied Telesis AT-8324 - Manual (Page 17)

AT-8316F and AT-8324 Installation Guide
17
Each port has two LEDs that reflect the operating status of the port.
On the AT-8316F switch, the port LEDs are located directly above or
next to each port. On the AT-8324 switch, the port LEDs are grouped
together on the right side of the switch. Table 1-3 describes the port
LEDs on the Ethernet switch.
Table 1-3 Switch Port LED Status
LED State Description
L/A (Link/Activity) Solid Green This indicates a 100 Mbps link.
Flashing Green This indicates 100 Mbps activity.
Solid Amber This indicates a 10 Mbps link (AT-8324 switch
only).
Flashing Amber This indicates 10 Mbps activity (AT-8324 switch
only).
D/C (Duplex/Collision) Solid Green The port is operating at full-duplex.
Solid Amber The port is operating at half-duplex.
Flashing Amber Collisions are occurring on the line.