Safety information, Safety information -2 – Allied Telesis AT-3726 User Manual
Page 20
Installing the Switch
2-2
Safety Information
Warning
ELECTRIC SHOCK HAZARD
To prevent ELECTRIC shock, do not remove cover. No user-service-
able parts inside. This unit contains HAZARDOUS VOLTAGES and
should only be opened by a trained and qualified technician. To avoid
the possibility of ELECTRIC SHOCK, disconnect electric power to the
product before connecting or disconnecting the LAN cables.
Laser
This is a “CLASS 1 LED PRODUCT.”
LIGHTNING DANGER
DO NOT WORK on equipment or CABLES during periods of
LIGHTNING ACTIVITY.
Caution
POWER CORD IS USED AS A DISCONNECTION DEVICE. TO
DE-ENERGISE EQUIPMENT disconnect the power cord.
ELECTRICAL—AUTO VOLTAGE ADJUSTMENT
This product will automatically adjust to any voltage between the
ranges shown on the label.
ELECTRICAL—TYPE CLASS 1 EQUIPMENT
THIS EQUIPMENT MUST BE EARTHED. Power plug must be
connected to a properly wired earth ground socket outlet. An
improperly wired socket outlet could place hazardous voltages on
accessible metal parts.
ELECTRICAL—CORD NOTICE
Use power cord, maximum 4.5 meters long, rated 6 amp minimum,
250V, made of HAR cordage molded IEC 320 connector on one end
and on the other end a plug approved by the country of end use.
Caution
Air vents must not be blocked and must have free access to the room
ambient air for cooling.
Caution
OPERATING TEMPERATURE
This product is designed for a maximum ambient temperature of 40
°
C.
Caution
ALL COUNTRIES: Install product in accordance with local and
National Electrical Codes.