Allied Telesis AT-MC602 - Manual (Page 55)

AT-MC601, AT-MC602 Installation and User’s Guide (For Use with AT-MCR12 Only)
55
Standards: This product meets the following safety standards.
1 RFI Emission EN55022 Class A, FCC Part 15 Class A,
C-TICK
2 Immunity EN55024
3 Electrical Safety EN60950, UL60950, FCC Part 68
Safety
4 Only use the power adapter supplied with the extender.
The AT-MC602 must be inserted in the AT-MCR12 chassis, which is equipped with a
proper AC/DC converter.
5 Caution: Power cord is used as a disconnection device. To de-energize equipment
disconnect the power cord.
6 Lightning Danger
Danger: Do not work on equipment or cables during periods of lightning activity.
7 Do not block air vents.
8 Do not connect a telephone line into the signal connector.
9 Operating Temperature: This product is designed for a maximum ambient
temperature of 40 degrees C.
10 All Countries: Install product in accordance with local and National Electrical Codes.
U.S. Federal Communications Commission
Radiated Energy
Note: This equipment has been tested and found to comply with the limits for a Class A digital
device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with this instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Note: Modifications or changes not expressly approved of by the manufacturer or the FCC, can
void your right to operate this equipment.
FCC Part 68 Product Identifier
This equipment complies with Part 68 if the FCC rules and the requirements adopted by the
ACTA. On the bottom of the equipment is a label that contains, among other information, a
product identifier in the following format:
• US: A5TOT00BMC60X
If requested, this number must be provided to the telephone company.
Industry Canada
This equipment complies with Industry Canada CS03 Standard, Certificate Number:
- IC:336A-MC60X.
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le
matériel brouilleur du Canada.