Allied Telesis AT-MC602 - Manual (Page 33)

AT-MC601, AT-MC602 Installation and User’s Guide (For Use with AT-MCR12 Only)
33
Powering On
the Provider
Unit
Powering on the AT-MC602 Provider Unit requires that the host
equipment, AT-MCR12 rackmount chassis, is powered on as well.
Warning
The QUALIFIED SERVICE PERSONNEL must verify that the
AT-MCR12 power cord is connected to the socket provided with the
ground conductor.
If the socket is not provided with the ground connector, the
QUALIFIED SERVICE PERSONNEL must install a permanent
ground connection using the bond stud on the rear panel of the
AT-MCR12 chassis .
For detailed information on how to power on the AT-MCR12 unit, refer
to the AT-MCR12 Meia Converter Rackmount Chassis Installation Manual.