Allied Telesis AT-MC602 - Manual (Page 13)

AT-MC601, AT-MC602 Installation and User’s Guide (For Use with AT-MCR12 Only)
13
Hardware Features
The following sections describe these hardware features of the
AT-MC601 and AT-MC602 network extenders:
❑ VDSL Line port
❑ PSTN port
❑ 10/100 Mbps twisted pair Ethernet port
❑ Status LEDs
❑ Management port
❑ Management cable
❑ 12V DC power supply input port
❑ External AC/DC power adapter
Note
The AT-MC602 unit can only be installed in an AT-MCR12 chassis.
VDSL Line Port The VDSL Line port allows you to connect the AT-MC601 Subscriber unit
to a telephone jack (wall outlet) and the AT-MC602 Provider unit to the
inside phone line at the wiring closet. The two units need to be within
1,200 meters of each other in order for the port to operate properly. The
port transmits voice at a frequency of 300-3400 Hz and Ethernet data at
frequencies of 300 KHz to 8 MHz. This port features an RJ-11 connector.
Table 1 lists the RJ-11 port pinouts and their assignments.
Table 1 VDSL - RJ-11 Port Pinouts
Pin Assignment
1 pass-through 6
2 pass-through 5
3 VDSL and phone ring
4 VDSL and phone tip
5 pass-through 2
6 pass-through 1