Allied Telesis AT-MC602 - Manual (Page 28)

Installation
28
Cabling the
Subscriber Unit
To cable the Subscriber unit, perform the following steps:
1. First, connect the Ethernet cable from the Ethernet port to the
Ethernet port on the computer, as shown in Figure 9.
Figure 9 Ethernet to Computer
2. Then, connect a telephone line cable from the PSTN port to the
telephone, as shown in Figure 10.
Figure 10 PSTN to Telephone
LINE
10Base T/ 100Base TX
PSTN
LINK
ACT
PWR
ERR
LINK
MGMT
AT-MC601
VDSL EXTENDED ETHERNET
LINE
10Base T/ 100Base TX
PSTN
LINK
ACT
PWR
ERR
LINK
MGMT
AT-MC601
VDSL E XTEND ED ETH ERNET