Allied Telesis AT-MC602 - Manual (Page 40)

Configuration
40
The Configuration Saved pop-up shown in Figure 22 will appear when
the set rate or the highest possible rate has been achieved.
Figure 22 Configuration Saved
An unsuccessful configuration attempt may include the following status
reports:
Loading defaults
Can’t read link status
Done
These negative status reports may also be accompanied by error
message pop-ups. Error messages are explained in ”Troubleshooting” on
page 47.
HIGH -> LOW/LOW -> HIGH
Allows you to choose the negotiation direction for the modem speed.
The default and preferred direction is Low -> High. Choosing a
negotiation direction determines how the modem searches for speeds.
When set to Low -> High, the modem will start at minimum speeds and
keeps negotiating progressively higher speeds until it has achieved its
maximum speed for the connection.
Apply
Press the Apply button to set your data transfer rates and negotiation
direction selections.
About
Use the About button to display the version number of the AT-S57
configuration software.