Allied Telesis AT-MC602 - Manual (Page 35)

35
Chapter 3
Configuration
The configuration software allows you to adjust and monitor the
operating parameters of the media converter. Some of the functions
that you can perform with the software include:
❑ Determine the VDSL link status
❑ Set the upstream and downstream data transfer rates
❑ Monitor the status of the VDSL parameters on both the local and
remote units
❑ Monitor the status of the Ethernet parameters on both the local
and remote units
❑ Link recovery
The AT-S57 configuration software is included on the Documentation
CD included with the network extender. The default settings may be
adequate for some networks and may not need to be changed. If this is
true for your network, then you can use the network extenders by simply
connecting the units to your network, as explained in ”Installation” on
page 20.
Note
The default settings for the configuration software can be found in
Appendix A.
To actively configure a network extender by changing or adjusting its
operating parameters, you must access the AT-S57 software while
connected to the AT-MC602 Provider unit. The AT-S57 software has a
menu interface that makes it very easy to use.