Allied Telesis AT-MC602 - Manual (Page 36)

Configuration
36
Starting a Configuration Session
Downloading
Software
Updates
In order to configure and manage your AT-MC601 and AT-MC602 VDSL
network extenders, you need to download a copy of the configuration
software onto the computers you will use to manage the units. The AT-
S57 configuration software is included on the Documentation CD
provided with the units.
New releases of the AT-S57 configuration software are available from the
Allied Telesyn Web site at www.alliedtelesyn.com or from our FTP
server at
ftp.alliedtelesyn.com. To log on to the FTP server, enter
“anonymous” for the user name and your email address for the
password. Management software for the AT-MC601 and AT-MC602 VDSL
network extenders will have “S57” as part of the file name.
Cabling
Preparations
Once you have a copy of the software on your computer, connect the
Provider unit to your computer using the management cable provided,
as shown in Figure 18. Attach the 9-pin RS-232 end of the cable to the
COM 1 or COM 2 port on your computer. Attach the 8-pin DIN end of the
cable to the management port on the unit.
Figure 18 Connecting the Management Cable
If the network extender is not already on, power on the unit using the
power cable provided. Refer to ”Powering On the Subscriber Unit” on
page 29 for further instructions on how to power on the unit.
LINE
10Base T/ 100Base TX
PSTN
LINK
ACT
PWR
ERR
LINK
MGMT
AT-MC602
VDSL EXTENDED ETHERNET