Allied Telesis AT-S79 - Manual (Page 92)

Chapter 7: Virtual LANs
92 Section I: Using the Menus Interface
b. Type the new name for the VLAN and press Enter. A VLAN name
can be up to 32 characters and can include spaces.
6. To add a tagged port to the VLAN, do the following:
a. Type A for Add Member and press Enter.
The following prompt is displayed:
Add member->Enter port number >
b. Enter the number of the port and press Enter. You can add more
than one port at a time. You can specify the ports individually (i.e.,
2,5,11), as a range (i.e., 4-7), or both (i.e., 2,5,11-15).
7. To remove a tagged port from the VLAN, do the following:
a. Type R for Remove Member and press Enter.
The following prompt is displayed:
Delete number -> Enter port number >
b. Enter the number of the tagged port you want to remove and press
Enter. You can remove more than one port at a time. You can
specify the ports individually (i.e., 2,5,11), as a range (i.e., 4-7), or
both (i.e., 2,5,11-15).
8. Type Q to select Quit to previous menu and save your changes.