Allied Telesis AT-S79 - Manual (Page 36)

Chapter 3: Basic Switch Parameters
36 Section I: Using the Menus Interface
Setting the User Interface Configuration
This procedure explains how to adjust the user interface and security
features on the switch. With this procedure you can:
ˆ Change the console timer, used to automatically end inactive local
management sessions.
ˆ Change the AT-S79 management login user name and password.
ˆ Enable and disable the web server, used to manage the switch from a
remote management station with a web browser.
To set the switch’s user interface configuration, perform the following
procedure:
1. From the Main Menu, type B to select Basic Switch Configuration.
The Basic Switch Configuration Menu is shown in Figure 4 on page 30.
2. From the Basic Switch Configuration Menu, type U to select User
Interface Configuration.
The User Interface Configuration Menu is shown in Figure 7.
Figure 7. User Interface Configuration Menu
The RADIUS Server Configuration option is described Chapter 10,
“RADIUS Authentication Protocol” on page 119.
AT-GS950/16 Local Management System
Basic Switch Configuration -> User Interface Configuration Menu
Console UI Idle Timeout: 5 Min.
Web Server: Enabled
User Name: manager
----------------------- -----------------------------
Set [C]onsole UI Time Out
Enable/Disable [W]eb Server
Change Administrator User [N]ame [R]ADIUS Server Configuration
Change Administrator [P]assword [Q]uit to previous menu
Command>