Allied Telesis AT-S79 - Manual (Page 122)

Chapter 10: RADIUS Authentication Protocol
122 Section I: Using the Menus Interface
7. Enter the encryption key of the RADIUS server.
8. Type R to select Set Response Time.
The following prompt is displayed:
Enter response time>
9. Enter the amount of time in seconds the switch should wait for a
response from the RADIUS server. The range is 1 to 120 seconds.
The default is 10 seconds.
10. Type M to select Max Retransmission.
The following prompt is displayed:
Enter maximum retransmissions>
11. Enter the number of times the switch should retransmit to the RADIUS
server in the event the server does not respond. The range is 1 to 254.
The default is 3.
12. Type Q to select Quit to previous menu and save your changes.