Allied Telesis AT-S95 WEB - Manual (Page 21)

Getting Started
Logging Out
Page 21
Logging Out
The Logout option enables the user to log out of the device thereby terminating the running session.
To log out:
• In any page, click Logout on the menu. The current management session is ended and the Log Off Page
opens:
Figure 7: Log Off Page
Resetting the Device
The Reset option enables resetting the device from a remote location.
Note
Save all changes to the Running Configuration file before resetting the device. This prevents the current
device configuration from being lost. See also "System Utilities".
To reset the device:
1. In the System General Page, click Reset. You are prompted to confirm.
2. Click OK. The device is reset. Resetting the device ends the web browser management session. You must
restart the session to continue managing the device. After the device is reset, a prompt for a user name and
password displays.
3. Enter a user name and password to reconnect to the Web Interface.
To reset the device to the predefined default configuration:
• In the System General Page, click Defaults. The default settings are restored and the device is reset.
Configurable Login Banner
The system supports a text based banner that is configurable only via a CLI command to enable the telnet session
to display security messages above the login prompt prior to login.