Allied Telesis AT-GS950/16 - Manual (Page 45)

AT-GS950/16 Web Interface User Guide
45
User Interface Configuration
This procedure explains how to enable and disable the user interfaces on
the switch. With this procedure, you can enable or disable the AT-GS950/
16 SNMP Agent. For more information about SNMP, go to Chapter 16,
“SNMPv1 and v2c” on page 209 and Chapter 17, “SNMPv3” on page 223.
Note
The Web Server Status is displayed as Enabled for your
information only. The Web Server cannot be disabled.
SNMP Interface To enable or disable the AT-GS950/16 SNMP interface, perform the
following procedure:
1. From the main menu on the left side of the page, click the System
folder.
The System folder expands.
2. From the System folder, select User Interface.
The User Interface Page is displayed. See Figure 17.
Figure 17. User Interface Page
3. Choose Enabled or Disabled from the pull-down list for the SNMP
Agent parameter.
Enabled - When you enable this parameter, the SNMP agent is
active. You can manage the AT-GS950/16 switch with Network
Management Software and the switch’s private MIB.
Disabled - When you enable this parameter, the SNMP agent is
inactive.