Allied Telesis AT-GS950/16 - Manual (Page 35)

AT-GS950/16 Web Interface User Guide
35
5. Change the IPv6 system settings by observing or entering new
information in the following fields:
IPv6 Unicast Address/Prefix Length - Displays the current IPv6
unicast address and prefix length of the switch. To change the
address and prefix length, enter a new IPv6 unicast address and
prefix length. When DHCP is enabled, you cannot change this
parameter.
IPv6 Static Gateway - Displays the current IPv6 static gateway of
the switch. To change the gateway, enter a new IPv6 static
gateway. When DHCP is enabled, you cannot change this
parameter.
IPv6 Dynamic Gateway - This parameter displays the IPv6
Dynamic Gateway of the switch. You cannot change this
parameter.
6. Click Apply.
7. To change the Neighbor Solicitation (NS) retransmit time, enter the
new time in the field next to NS Retransmit Time. The range is from 1
to 3600 seconds.
8. Change the link local address settings as follows:
Automatic Link Local Address - Select Enabled to automatically
assign a link local address. Select Disabled to manually assign the
link local address.
Link Local Address/Prefix length - To change the link local
address and prefix length, enter a new address and prefix length.
When Automatic Link Local Address is enabled, you cannot
change this parameter.
9. Click Apply.
10. Select Save Settings to Flash from the main menu on the left side of
the page to save the new IPv6 configuration to memory.
Caution
If you do not select Save Settings to Flash, the IPv6 setting will
revert to its original setting when you power cycle or reboot the
switch.