Delete a trap host table entry – Allied Telesis AT-GS950/16 User Manual

Page 221

AT-GS950/16 Web Interface User Guide

221

Delete a Trap

Host Table Entry

Use the following procedure to delete a Host table entry:

1. From the main menu on the left side of the page, select the SNMP

folder.
The SNMP folder expands.

2. From the SNMP folder, select Trap Management.

3. The Trap Management Page is displayed. See Figure 81 on page 219.

4. To delete an entry in the host table, click Delete next to the entry in the

table that you want to remove.
The Host table entry is removed from the table. No confirmation
message is displayed.

5. From the main menu on the left side of the page, select Save Settings

to Flash to permanently save your changes.