beautypg.com

Disable led eco mode – Allied Telesis AT-GS950/16 User Manual

Page 349

background image

AT-GS950/16 Web Interface User Guide

349

Disable LED ECO Mode

To disable LED ECO Mode, perform the following procedure:

1. From the main menu on the left side of the page, select the Tools

folder.
The Tools folder expands.

2. From the Tools folder, select LED ECO Mode.

The LED ECO Mode page is displayed. See Figure 145.

Figure 145. LED ECO Mode in Enabled State

3. Select Disabled from the LED ECO Mode pull-down menu.

4. Click Apply.

The port LEDs turn on, and the LED Status changes to ON. See Figure
146.

Figure 146. LED ECO Mode Disabled

5. From the main menu on the left side of the page, select Save Settings

to Flash to permanently save your changes.

See also other documents in the category Allied Telesis Computer hardware: