Allied Telesis AT-GS950/16 - Manual (Page 343)

AT-GS950/16 Web Interface User Guide
343
Download or Upload a Configuration File via TFTP
This section describes how to download or upload a configuration file
using TFTP on a TFTP server. Before you download or upload a
configuration file onto the switch using TFTP, note the following:
 Your network must have a TFTP server.
 You must specify the path to the configuration file on the TFTP server.
 Start the TFTP server software before you begin the download
procedure.
To download an AT-S114 configuration file onto a TFTP server or upload
an AT-S114 configuration file onto the switch using a TFTP server,
perform the following procedure:
1. From the menu on the left side of the home page, select the Tools
folder.
The Tools folder expands.
2. From the Tools folder, select the Config File Backup/Restore folder.
The Config File Backup/Restore folder expands.
3. From the Config File Backup/Restore folder, select via TFTP.
The Configuration Backup/Restore via TFTP Page is displayed. See
Figure 141.
Figure 141. Configuration Backup/Restore via TFTP Page
Configuration
File Download
To download an AT-S114 configuration file to a TFTP server, perform the
following procedure:
1. Enter the IP address of the TFTP server in the field next to the TFTP
Server IP parameter.
For an IPv4 address, click IPv4, then enter the address using
xxx.xxx.xxx.xxx format.
For an IPv6 address, click IPv6, then enter the address using
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx hexadecimal format.
2. Enter the name of the configuration file in the field next to the Config
File Name parameter.