Allied Telesis AT-GS950/16 - Manual (Page 254)

Chapter 18: Access Control Configuration
254
Policy Database
The Policy Database page displays the status of the order that policies are
applied to each port. You can order the display by Policy Index or
Sequence number.
You can also display detailed information for each policy.
You can display a policy’s sequence or detailed information by following
the procedures in the following sections:
 “Display Policy Sequence,” next
 “Display Specific Policy Information” on page 255
Display Policy
Sequence
To display the policy sequence, perform the following procedure:
1. From the main menu on the left side of the page, select the Access
Control Config folder.
The Access Control Config folder expands.
2. From the Access Control Config folder, select Policy Database.
The Policy Database page is displayed in Figure 99.
Figure 99. Policy Database Page
3. Select the switch port from the Select Port pull-down menu that you
want to view.
4. Click either the Index or Sequence radio button to view the defined
policies as follows:
 Index - Select this radio button to view the defined
Policies ordered by Policy Index.
 Sequence - Select this radio button to view the
sequence in which the Policies are applied.