Allied Telesis AT-GS950/16 - Manual (Page 135)

AT-GS950/16 Web Interface User Guide
135
Delete Static Unicast Address
To delete a unicast MAC address from the MAC address table, perform
the following procedure:
1. From the main menu on the left side of the page, select the Bridge
folder.
2. From the Bridge folder, select Static Unicast.
The Static Unicast Address Table Page is displayed. See Figure 43 on
page 132.
3. Select Delete next to the static unicast address that you want to
remove.
The static unicast address is removed from the Static Unicast Address
Table Page.
To delete all 802.1q address entries, click the Delete All button above
the 802.1Q VLAN table.
To delete all port-based VLAN address entries, click the Delete All
button above Port-Based VLAN table.
4. From the main menu on the left side of the page, select Save Settings
to Flash to permanently save your changes.