Allied Telesis NetExtreme II Adapters - Manual (Page 64)

Chapter 5: Installing the NDIS2 Driver Software
64
 NodeAddress. Specifies the network address used by the network
adapter. If a multicast address or a broadcast address is specified, the
adapter uses the default MAC address.
 FixCheckSumOff. Turns off the driver's workaround for the TCP/IP
stack to recognize the 1s complemented version of the checksum.
 AcceptAllMC. Informs the driver to deliver all multicast packets to the
upper protocol.
See below for an example of the keywords:
[BXND20X] 
DriverName = "BXND20X$"

BusNum = 3

DevNum = 14

PortNum = 2 
LineSpeed = 1000

Duplex = Full

NodeAddress = 001020304050