Allied Telesis NetExtreme II Adapters - Manual (Page 59)

AT-2973SX, AT-2973T, AT-2973T/4, and AT-VNC10S Adapters Installation and User’s Guide
59
7. Open the NCADMIN folder and double-click ncadmin.exe.
8. Follow the on-screen instructions to make the network startup disk
(choose NE2000 Compatible from the list of adapters).
Modifying the
Startup Disk
To modify the startup disk, do the following:
1. Edit A:\Net\Protocol.ini with Notepad or a similar text editor.
a. Change DriverName=$ to DriverName=BXND20X$.
b. Remove all other parameter entries under the [MS$NE2CLONE] or
equivalent section such as IOBASE=0x300 or INTERRUPT=3, and
so on.
Example Protocol.ini file for IP
The following is an example of an protocol.ini file for IP:
[network.setup] 
version=0x3110 
netcard=ms$ne2clone,1,MS$NE2CLONE,1

transport=tcpip,TCPIP

lana0=ms$ne2clone,1,tcpip 
[MS$NE2CLONE] 
DriverName=BXND20X$

[protman]

DriverName=PROTMAN$ 
PRIORITY=MS$NDISHLP

[tcpip]

NBSessions=6

DefaultGateway=0 
SubNetMask=255 0 0 0

IPAddress=192 168 0 1

DisableDHCP=0

DriverName=TCPIP$ 
BINDINGS=MS$NE2CLONE

LANABASE=0
Example Protocol.ini file for NetBEUI
The following is an example of an protocol.ini file for NetBEUI:
[network.setup]

version=0x3110 
netcard=ms$ne2clone,1,MS$NE2CLONE,1

transport=ms$ndishlp,MS$NDISHLP

transport=ms$netbeui,MS$NETBEUI 
lana0=ms$ne2clone,1,ms$ndishlp

lana1=ms$ne2clone,1,ms$netbeui

[MS$NE2CLONE]
