Appendix b, At-gs950/48 default parameters, Appendix b: at-gs950/48 default parameters – Allied Telesis AT-GS950/48 User Manual
Page 361

361
Appendix B
AT-GS950/48 Default Parameters
Table 10 lists the factory default settings for the AT-S116 Version 1.0.0
Management software on the AT-GS950/48 switch. The Parameters
reflect the fields found on each web page.
Table 10. AT-S116 Version 1.0.0 Management Software Default Settings
Parameter
AT-GS950/48
Default Setting
Specifications
System/Management
System Description
AT-GS950/48
-
System Object ID
1.3.6.1.4.1.207.1.4.204
-
System Name
none
0 - 15 characters
System Location
none
0 - 30 characters
System Contact
none
0 - 30 characters
System/IP Setup
IP Address
192.168.1.1
IPv4 address in xxx.xxx.xxx.xxx hex format;
except 127.0.0.1
Subnet Mask
255.255.255.0
IPv4 address in xxx.xxx.xxx.xxx hex format;
except 127.0.0.1
Default Gateway
Address
0.0.0.0
IPv4 address in xxx.xxx.xxx.xxx hex format;
except 127.0.0.1
DHCP Mode (Client)
Disabled
Enabled/Disabled
System/IP Access List
IP Restriction Status
Disabled
Enabled/Disabled
IP address
none
IPv4 address in xxx.xxx.xxx.xxx hex format;
except 127.0.0.1