Allied Telesis AT-GS950/48 - Manual (Page 289)

AT-GS950/48 Web Interface User Guide
289
Modifying a
VLAN
To modify or delete a VLAN ID, you must first deleted it (using the
procedure below) and then re-entered re-enter it by following the
procedure outline in “Creating a VLAN” on page 288.
Deleting a VLAN
To delete a VLAN ID, do the following:
1. From the main menu on the left side of the page, select DHCP
Snooping.
The DHCP Snooping folder expands.
2. From the DHCP Snooping folder, select VLAN Settings.
The VLAN Settings page is displayed. See Figure 115 on page 288.
3. To delete a VLAN ID, click the Delete button in the Action column of
the table.
The VLAN ID is removed from the table.
4. From the main menu on the left side of the page, select Save
Configuration to Flash to permanently save your changes.