Allied Telesis AT-GS950/48 - Manual (Page 320)

Chapter 25: Software/Configuration Updates
320
Figure 126. Firmware Upgrade via TFTP Page
The Image/Version Date shows the current version and date of
software installed on the switch.
3. Change the following parameters as necessary:
TFTP Server IP: The IP address of the TFTP server from which
you are downloading the new software.
Image File Name: The full name of the AT-S116 Version 1.0.0 file
(including the file extension) you are downloading.
Retry Count: The number of times the firmware upgrade is retried.
The range is 1 - 20.
4. To activate your changes on the switch, click Apply.
The software immediately begins to download onto the switch. This
process takes a few minutes. After the software download is complete,
the switch initializes the software and reboots. You will lose your web
browser connection to the switch during the reboot process.