Vlan setting, Creating a vlan – Allied Telesis AT-GS950/48 User Manual

Page 288

Chapter 22: DHCP Snooping

288

VLAN Setting

You can create and delete DHCP Snooping VLAN settings by following
the procedures in these sections:







Creating a VLAN

To define a VLAN that will be a part of the DHCP Snooping feature, do the
following:

1. From the main menu on the left side of the page, select DHCP

Snooping.

The DHCP Snooping folder expands.

2. From the DHCP Snooping folder, select VLAN Settings.

The VLAN Settings page is displayed. See Figure 115.

Figure 115. DHCP Snooping VLAN Settings Page.

3. In the VLAN ID field, enter a VLAN ID that has been pre-defined.

4. Click Add.

The new VLAN ID entry is displayed in the table on the page.

5. If you find more than one VLAN ID to configure for DHCP Snooping,

enter them one at a time by following steps 3 and 4.

6. From the main menu on the left side of the page, select Save

Configuration to Flash to permanently save your changes.