Allied Telesis AT-GS950/48 - Manual (Page 325)

AT-GS950/48 Web Interface User Guide
325
Caution
If you are uploading a configuration file, the file will be implemented
immediately after download. A short interruption in network service
will be experienced while the new configuration file is loaded.
Note
If the IP address contained in the new configuration file is different
than the one you currently have in your browser URL, you will loose
connectivity with the AT-S116 Version 1.0.0 Management software
on the
AT-GS950/48 switch after the new configuration file is loaded. If this
is the case, you can identify the new IP address by using the ATI
Web Discovery Tool. See“DHCP and ATI Web Discovery Tool” on
page 44 for more information.
Configuration
File Download
To download an AT-S116 Version 1.0.0 configuration file to your PC,
perform the following procedure:
1. Enter the IP address of the TFTP server in the field next to the TFTP
Server IP parameter.
2. Enter the name of the configuration file in the field next to the Config
File Name parameter.
3. Select the Download button.
The Results page is displayed indicating that the file has been
successfully downloaded. See Figure 128 on page 322.
4. Click on the “Return to previous page” link.