Allied Telesis AT-GS950/48 - Manual (Page 171)

AT-GS950/48 Web Interface User Guide
171
GarpLeaveAllTime - This parameter is the GARP Leave Timer.Its
range si 30 - 2147483630 milli-seconds. This timer must be set in
relation to the GVRP Leave Timer according to the following
equation:
GARPLeaveAllTimer > (GARPLeaveTimer + 10)
Note
To ensure compatibility between network devices, you need
to configure the same values for the GARP Join Timer, GARP Leave
Timer, and GARP Leave All Timer on all participating GVRP devices
in your network.
5. Once you have configured the parameters, click Apply for the affected
port.
6. If you want to configure the GVRP timers for other ports, repeat
steps 4 and 5.
7. From the main menu on the left side of the page, select Save
Configuration to Flash to permanently save your changes.