Acer 5241 - Manual (Page 42)

32 Chapter 2
DOS Flash Utility
Perform the following steps to use the DOS Flash Utility:
1. Press F2 during boot to enter the Setup Menu.
2. Select Boot Menu to modify the boot priority order, for example, if using USB HDD to Update BIOS, move
USB HDD to position 1.
3. Execute the FLASH.BAT batch file to update BIOS in DOS mode.
The flash process begins as shown.
InsydeH2O Setup Utility Rev. 3.5
Item Specific Help
Use < > or < > to
select a device, then
press to move it
up the List, or
to move it down the
list. Press to
escape the menu.
F1
Es c
Help
Exit
Select Item
Select Menu
Change Values
Select Sub-Menu Enter
F9
F10
Setup Defaults
Save and Exit
Boot priority order:
1: IDE0: ST9250315AS
2: IDE1: SONYDVD
3: USB FDD:
4: Network boot: Realtek Boot Agent
5: USB HDD: xxxx USB
6: USB CDROM:
Boot priority order:
1: IDE0: ST9250315AS
2: IDE1: SONYDVD
3: USB FDD:
4: Network boot: Realtek Boot Agent
5: USB HDD: xxxx USB
6: USB CDROM:
F5/F6
Main Boot Exit Security Information