Main – Acer 5241 User Manual
Page 35

Chapter 2
25
Main
The Main screen allows the user to set the system time and date as well as enable and disable boot option
and recovery.
NOTE: The screen above is for your reference only. Actual values may differ.
The table below describes the parameters in this screen.
Parameter
Description
Format/Option
System Time
Sets the system time. The hours are displayed with 24-
hour format.
Format: HH:MM:SS
(hour:minute:second)
System Date
Sets the system date.
Format MM/DD/YYYY
(month/day/year)
Total Memory
This field reports the memory size of the system.
N/A
Video Memory
This field shows the memory allocated for the video
graphics.
N/A
Quiet Boot
Allows startup to skip certain tests while booting,
decreasing the time needed to boot the system.
Option:
Enabled or
Disabled
Network Boot
Enables, disables the system boot from LAN (remote
server).
Option:
Enabled or
Disabled
F12 Boot Menu
Enables, disables Boot Menu during POST.
Option:
Enabled or Enabled
D2D Recovery
Enables, disables D2D Recovery function. The function
allows the user to create a hidden partition on hard disc
drive to store operation system and restore the system
to factory defaults.
Option:
Enabled or
Disabled
SATA Mode
Control the mode in which the SATA controller should
operate.
Option:
AHCI or IDE
InsydeH20 Setup Utility
Rev
3.5
Item Specific Help
F1
Es c
Help
Exit
Select Item
Select Menu
Change Values
Select
Sub-Menu
Enter
F9
F10
Setup Defaults
Save and Exit
[09:00:00]
[12/12/2008]
2048 MB
[256MB]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
[AHCI Mode]
[09:00:00]
[12/12/2008]
2048 MB
[256MB]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
[AHCI Mode]
System Time:
System Date:
Total Memory:
Video Memory:
Quiet Boot:
Network Boot:
F12 Boot Menu:
D2D Recovery:
SATA Mode:
System Time:
System Date:
Total Memory:
Video Memory:
Quiet Boot:
Network Boot:
F12 Boot Menu:
D2D Recovery:
SATA Mode:
F5/F6
Main
Boot
Exit
Security
Information