Samsung SPH-L300ZSASPR - Manual (Page 63)

Settings 52
1. Press > and tap Settings > More settings.
2. Tap NFC to create a checkmark and activate the feature.
Android Beam
When Android Beam is activated, you can beam application content to another NFC-capable
device by holding the devices close together. You can beam browser pages, YouTube videos,
contacts, and more.
1. Press > and tap Settings > More settings > Android Beam.
2. Tap the ON/OFF slider to turn Android Beam on .
3. Touch the back of your phone with another NFC-capable device to transfer content.
S Beam
When S Beam is activated, you can beam files to another NFC-capable device by holding the
devices close together. You can beam images and videos from your gallery, music files from
your music player, and more.
1. Press > and tap Settings > More settings > S Beam.
2. Tap the ON/OFF slider to turn S Beam on .
3. Touch the back of your phone with another NFC-capable device to transfer content.
Wi-Fi Direct
Wi-Fi Direct allows phone-to-device connections so you can transfer large amounts of data over
a Wi-Fi connection.
Activate a Connection
1. Press > and tap Settings > More settings.
2. Tap the ON/OFF slider to turn Wi-Fi direct on .
3. Tap Wi-Fi Direct to set up a peer-to-peer connection over Wi-Fi. While in Wi-Fi Direct
mode, the status bar will display .
Note
: The target device must also have Wi-Fi Direct service active and running before it can
be detected by your device.
Assign a Unique Name
1. Press > and tap Settings > More settings > Wi-Fi Direct.