Samsung SPH-Z400DAASPR - Manual (Page 50)

34 Section 2A. Phone Basics
Dialing From the Contacts List
1. Press Menu > Contacts .
2. Select the entry you want to call and press to
dial the entry’s default phone number.
– or –
To dial another number from the entry, select the
name and press
, and then select a number
and press .
Plus (+) Code Dialing
When placing international calls, you can use Plus
Code Dialing to automatically enter the international
access code for your location (for example, 011 for
international calls made from the United States).
1. Press and hold until a “+” is displayed on
your phone’s screen.
2. Dial the country code and phone number you’re
calling, and press
. (The access code for
international dialing will automatically be dialed,
followed by the country code and phone number.)
Using Speed Dialing
You can store up to 99 numbers in your phone’s speed
dial memory to make contacting friends and family as
easy as pressing a button or two. With this feature, you
can dial speed dial entries using one keypress for
locations 1–9 or two keypresses for locations 10–99.
To use One-Touch Dialing for speed dial locations 1–9:
ᮣ Press and hold the appropriate key for
approximately two seconds. Both the Contacts
entry’s name and phone number is displayed
onscreen.
Shortcut From standby mode, press Contacts (right
softkey) to list entries.
Z400.book Page 34 Wednesday, September 3, 2008 3:26 PM