Samsung SCH-U365WSAVZW - Manual (Page 83)

78
Adding a New Device
Search for a Bluetooth device and pair with it, to exchange
information between your phone and the device.
1. From the Home screen, press the Left Soft Key
Menu ➔ Settings ➔ Bluetooth ➔ Add New
Device. Bluetooth turns on, if it is not already on.
2. At the prompt, activate the target device’s Bluetooth
discoverable mode, then press OK.
3. Your phone searches for discoverable Bluetooth
devices and displays them.
4. Use the Directional Key to highlight the target
device and press PAIR. Follow the prompts:
• Auto Pairing: If you enabled Auto Pairing in Bluetooth Options,
and the selected device supports it, your phone sends a default
passkey to the device and pairs automatically.
• Pairing with Passkey: Enter a passkey, then press SET. Follow
the prompts on the target device to confirm the passkey and
complete the pairing.
5. After pairing, you can continue on to send information
to the paired device.
6. To configure pairing options for the new paired device,
highlight the new device and press the Right Soft Key
Options:
7. Use the Directional Key to highlight the new device and
press the Right Soft Key Options to set options for
this paired device:
• Remove Device: Remove this device from your phone’s pairing
list.
• Rename Device: Change the name of this device as it appears
in the pairing list.
• Incoming Security: Choose Always Ask or Always Connect
for future pairings with this device.
• Service Discovery: View the service profiles supported for
pairing with this device.
• Device Info: View information about the paired device.