Samsung HT-H6500WM-ZA - Manual (Page 49)

49
- English
Appendix
Additional Information
Notes
Connections
HdMI~OUT
~ ~ Certain HDMI output resolutions may not work,
depending on your TV.
~ ~ You must have an HDMI connection to enjoy
videos with 3D technology.
~ ~ A long HDMI cable may cause screen noise. If
this occurs, set HdMI~deep~Color to Off in the
menu.
Settings
3d~Settings
~ ~ For some 3D discs, to stop a movie during 3D
playback, press the e ( ExIT ) button once. The
movie stops and the 3D mode option is de-
activated.
To change a 3D option selection when you are
playing a 3D movie, press the e (
ExIT ) button
once. The Blu-ray menu appears. Press the e
( ExIT ) button again, then select 3d~Settings in
the Blu-ray menu.
~ ~ Depending on the content and the position
of the picture on your TV screen, you may see
vertical black bars on the left side, right side, or
both sides.
Tv~Aspect~Ratio
~ ~ Depending on the disc type, some aspect ratios
may not be available.
~ ~ If you select an aspect ratio and option which is
different than the aspect ratio of your TV screen,
the picture might appear to be distorted.
~ ~ If you select 16:9~Original, your TV may display
4:3~pillarbox (black bars on the sides of the
picture).
Bd~Wise~(Samsung~products~only)
~ ~ When Bd~Wise is On, the Resolution setting
automatically defaults to Bd~Wise and Bd~Wise
appears in the Resolution menu.
~ ~ If the product is connected to a device that does
not support Bd~Wise, you cannot use the Bd~
Wise function.
~ ~ For proper operation of Bd~Wise, set the Bd~
Wise option in both the product and the TV to
On.
digital~Output
~ ~ Be sure to select the correct digital~Output or
you will hear no sound or just loud noise.
~ ~ If the HDMI device (AV receiver, TV) is not
compatible with compressed formats (Dolby
Digital, DTS), the audio signal outputs as PCM.
~ ~ Regular DVDs do not have BONUSVIEW audio
and Navigation Sound Effects.
~ ~ Some Blu-ray Discs do not have BONUSVIEW
audio and Navigation Sound Effects.
~ ~ This digital~Output setup does not affect the
analog (L/R) audio or HDMI audio output to
your TV.
It affects the optical and HDMI audio output
when your product is connected to an AV
receiver.
~ ~ If you play MPEG audio soundtracks, the audio
signal outputs as PCM regardless of your digital~
Output selections (PCM or Bitstream).
~ ~ digital~Output can be activated when Sound~
Output is set to Tv~Speaker.
Bd-Live~Internet~Connection
~ ~ The Internet connection may be restricted while
you are using BD-LIVE contents.
Anynet+~(HdMI-CEC)
~ ~ Depending on your TV, certain HDMI output
resolutions may not work. Please refer to the
user manual of your TV.
~ ~ This function is not available if the HDMI cable
does not support CEC.
~ ~ If your Samsung TV has an Anynet+ logo, then it
supports the Anynet+ function.
Bd~data~Management
~ ~ In the external memory mode, disc playback may
be stopped if you disconnect the USB device in
the middle of playback.
~ ~ Only those USB devices formatted in the FAT file
system (DOS 8.3 volume label) are supported.
We recommend you use USB devices that
support the USB 2.0 protocol with 4 MB/sec or
faster read/write speeds.
~ ~ The Resume Play function may not work after
you format the storage device.
~ ~ The total memory available to Bd~data~
Management may differ, depending on
conditions.
Front~display
~ ~ You cannot change the brightness of the
button and the vOL +, - button.
Appendix