Samsung HT-H6500WM-ZA - Manual (Page 34)

34
- English
Playing Content
Shuffling~Tracks~on~an~Audio~Cd
You can set the product to play tracks on an audio
CD (CD-DA/MP3) at random.
1.~ During playback, use the ,.
buttons to
select
1
in the lower left corner of the
screen, and then press the Ok button.
2.~ Use the ,. to set the Shuffle mode Off or
On, and then press the Ok button.
Using~play~Selected~with~a~Commercial~
Cd
1.~ On the Track List screen, select Settings~(
) on the bottom left, and then press the Ok
button. The Settings~menu appears.
2.~ Select play~Selected, and then press the Ok
button. The play~Selected screen appears.
3.~ Use the ,. buttons to select a track, and
then press the Ok button. A check appears
to the left of the track.
4.~ Repeat Step 3 to select and check additional
tracks.
5.~ To remove a track from the list, move to the
track, and then press the Ok button again.
The check on the track is removed.
6.~ When done, select play on the bottom
left, and then press the Ok button. The
Track List screen reappears listing only the
tracks you checked. The selected tracks play
automatically.
7.~ To cancel the play~Selected list, select Settings~
( ) on the bottom left of the Track list
screen. On the Settings menu select play~all~
list. The Track List screen reappears with all
tracks on the CD listed.
✎ You can select up to 99 tracks from an Audio
CD (CD-DA) using Play Selected.
✎ On the play~Selected screen, you can also
choose Select~All, deselect~All, and Cancel.
- Use Select~All to select all tracks. This cancels
your individual track selections. When you
press the ' (
RETURN ) button on your remote
or select play and then press the Ok button,
all tracks will appear on the Track List screen,
and the product will begin to play all tracks
from Track 001.
- Use deselect~All to deselect all selected
tracks at once. Then, select individual tracks
or use Select~All to select all the tracks, and
then press the ' ( RETURN ) button on your
remote or select play and then press the Ok
button. If you do not use Select~All or select
individual tracks, the play~Selected list will
not change.
- Cancel cancels any changes you made on the
play~Selected screen. When you return to the
Track List screen, the play~Selected list will be
unchanged.
Using~play~Selected~with~Self-Recorded~
Media~(Cds,~USB~devices,~etc.)
1.~ Insert a self-recorded CD or USB device with
self-recorded files into the home theater. The
New~device~connected. pop-up appears.
2.~ Select Music, and then press the Ok button
on your remote. The File List screen appears
displaying icons for tracks, folders, or both.
3.~ If necessary, use the ,. buttons to
select a folder, and then press the Ok button.
4.~ When the tracks you want to play are
displayed, select Options in the upper right,
and then press the Ok button.
5.~ Select play~Selected, and then press the Ok
button. Check boxes appear on the upper
left sides of the track icons.
6.~ Use the ,. buttons to select a track,
and then press the Ok button. A check
appears in the check box.
7.~ Repeat Step 6 to check and select additional
tracks.
8.~ To remove a track from the list, move to the
track, and then press the Ok button again.
The check on the track is removed.
9.~ When done, select play, and then press the
Ok button. The Track List screen appears
listing only the tracks you checked. The
selected tracks play automatically.
10.~ To cancel the play~Selected list, press the '
( RETURN ) button or the e ( ExIT ) button. If
you press ' ( RETURN ), you return to the File
List screen. If you press e ( ExIT ), you go to
the Home screen.
✎ If you want to use play~Selected to watch
videos, use the Filter(
) function to select
videos instead of Music.