基本录制, Basic recording, 方便初学者录制 ( easy q 模式 ) – Samsung SC-D382-XAA User Manual
Page 40: Recording with ease for beginners (easy q mode)

36_ English
中文
_
36
方便初学者录制
(
EASY Q 模式 )
EASY Q 功能仅可用于
Camera ( 摄像 ) 模式。➥ 第 18 页
使用
EASY.Q 功能,摄录机的大多数拍摄设定都自动被调节,这将
让您免去繁琐的调节步骤。
1. 切换存储介质为 TAPE。( 仅限 SC-D383/D385)
2.按下 MODE 按钮设置为 Camera( 摄像 ) 模式 (
)。
3.按下 EASY Q 按钮。
当您按下
EASY.Q 按钮时,多数功能将被关闭
并且被列出的功能将被设置为
"Auto ( 自动 )" ( 手抖动补偿,聚焦,白平衡,
曝光,程序自动曝光,快门
)。
同时,屏幕上显示
EASY.Q 和手抖动补偿
(
) 指示图标。
4.按下录制开始 / 停止按钮,开始进行拍摄。
将使用基本自动设置进行拍摄。
取消
EASY.Q 模式
再次按下
EASY Q 按钮。
屏幕上的
EASY.Q 和手抖动补偿 (
) 指示图
标消失。
几乎所有的设置将返回到使用
EASY.Q 模式之
前的设定。
在拍摄的过程中,不能取消
EASY.Q 模式。
在使用
EASY.Q 操作时,不可使用的按钮。
下列控件不可用,因为这些项目是自动设置的。如果尝试
不可用的操作,可能会出现相应的提示信息
"Release the
Easy.Q!( 请退出 EASY.Q!)"。
-
MENU 按钮
当使用
PHOTO 按钮拍摄照片图像时,EASY.Q 模式没有手
抖动补偿功能。
•
•
•
•
•
•
•
•
•
•
基本录制
RECORDING WITH EASE FOR BEGINNERS (EASY Q MODE)
The EASY Q function works only in
Camera mode. ➥page 18
With the EASY Q function, most of the miniDV camcorder settings
are automatically adjusted, which frees you from making detailed
adjustments.
1. Set the Select switch to TAPE.
(SC-D383/D385 only)
2. Press the MODE button to set Camera ( ).
3. Press the EASY Q button.
When you press the
EASY Q button, most
functions turn off and the following functions
are set to
"Auto" (DIS, Focus, White Balance,
Exposure, Program AE, Shutter)
The EASY Q and DIS( ) indicators appear
on the screen at the same time.
4. Press the Recording start/stop button to start
recording.
Recording will begin using the basic automatic
settings.
To cancel the EASY Q mode
Press the
EASY Q button again.
The EASY Q and DIS( ) indicators disappear
from the screen.
Almost all the settings will return to the settings
that were set prior to activating EASY Q mode.
You cannot cancel the EASY.Q mode during
recording.
Buttons unavailable during EASY.Q operation
The following buttons and control are unavailable because
the items are automatically set. The
"Release the Easy.Q!"
messages may appear if unavailable operations are
attempted.
-
MENU button
Taking a photo image using the
PHOTO button while EASY.
Q is set releasesthe DIS function.
•
•
•
•
•
•
•
•
•
•
basic recording
OPEN
BATT.
CHG
MODE
TAPE
CARD
10Sec
16Bit
S
No Tape !
W
T
29
1/50
M
60min
0:00:00
SP
STBY
(SC-D383/D385 only)