Initial setting:display menu setting, 初始设置:显示菜单设置, 显示日期 / 时间 – Samsung SC-D382-XAA User Manual
Page 36: Date, Time

32_ English
中文
_
32
显示日期 / 时间
(DATE(
日期
) / TIME(
时间
))
在
Camera( 摄像 ) 模式 /Player( 播放 ) 模式 /M.Cam
( 存储卡摄像 ) 模式 /M.Player( 存储卡播放 ) 模式下显
示日期 / 时间。➥ 第
18 页
日期和时间自动记录在磁带的特殊区域。
1. 切换存储介质为 CARD或TAPE。( 仅限 SC-D383/D385)
2.按下 MODE 按钮设置为 Camera( 摄像 ) 模式 (
) 或
Player( 播放 ) 模式 (
)。
3.按下 MENU 按钮。
屏幕上显示菜单列表。
4.向上或向下拨动操纵杆 (▲ / ▼)选择"Display(画面设置)",
然后按下操纵杆或者向右拨动操纵杆
() 确认选择。
5.向上或向下拨动操纵杆 (▲ / ▼) 选择
"Date/Time( 日期 / 时间 )",然后按下操纵杆确认。
6.向上或向下拨动操纵杆 (▲ / ▼)选择日期 / 时间显示类
型,然后按下操纵杆确认。
日期 / 时间显示类型 :
"Off(关闭)","Date(日期)",
"Time( 时间 )",
"Date/Time( 日期 / 时间 )"。
7.若要退出,按下 MENU 按钮。
关于内置蓄电池
您的摄录机拥有内置蓄电池用来在关闭电源后保存
日期,时间和其他设置。只要内置蓄电池已安装在
摄录机内,那么当交流电源适配器连接至摄录机或
者当摄录机内插入电池组时可自动为其充电。如果
您未使用摄录机,内置蓄电池将会在大约 3 个月
左右的时候耗尽电量。请在使用本摄录机之前为内
置蓄电池充满电。如果内置蓄电池没有足够的电
量,那么输入的数据将不会被保留,并且屏幕上的
日期 / 时间将会显示为"
12:00
上午
1. 1.2008"( 当
"Date/Time( 日期 / 时间 )" 被设置为 "On( 打开 )"
时。
).
在以下情况的时候,日期 / 时间将会显示为 "
12:00
上午
1. 1.2008":
- 当内置蓄电池电量不足或已经耗尽的时候。
- 在设置时钟之前,已经录制的影音或者拍摄的照片上。
遥控器上的按钮与摄录机上的按钮功能相同。按下
一次显示日期"
1.1.2008",按下两次显示时间,再
次按下按钮屏幕上同时显示时间和日期。
•
•
•
•
•
•
•
初始设置:显示菜单设置
DISPLAYING THE DATE / TIME (DATE / TIME)
The date/time function works in
Camera / Player / M.Cam / M.Player
modes. ➥page 18
The date and time are automatically recorded on a
special data area of the tape.
1. Set the Select switch to CARD or TAPE.
(SC-D383/D385 only)
2. Press the MODE button to set Camera ( ) or
Player ( ).
3. Press the MENU button.
The menu list will appear.
4. Move the Joystick (▲ / ▼) up or down to select
"Display", then press the Joystick or move the
Joystick () to the right.
5. Move the Joystick (▲ / ▼) up or down to select
"Date/Time", then press the Joystick.
6. Move the Joystick (▲ / ▼) up or down to select the
date/time display type, then press the
Joystick.
Date/Time display type:
"Off", "Date", "Time",
"Date&Time".
7. To exit, press the MENU button.
On charging the built-in rechargeable battery
Your camcorder has a built-in rechargeable battery to
retain the date, time, and other settings even when the
power is off. The built-in rechargeable battery is always
charged while your camcorder is connected to the wall
outlet via the AC power adaptor or while the battery
pack is attached. The rechargeable battery will be fully
discharged in about 3 months if you do not use your
camcorder at all. Use your camcorder after charging the
built-in rechargeable battery. If the built-in rechargeable
battery is not charged, any input data will not be backed
up and the date/time appears on the screen as
"12:00
AM JAN. 1.2008" (when "Date/Time" display is set to "On").
The date/time will read
"12:00 AM JAN. 1.2008" in the
following conditions:
- When the built-in rechargeable battery becomes
weak or dead.
- If the movie or photo recording was made before
setting the date/time in the miniDV camcorder.
The same functional button exists on the remote control
as well. Press it once to display the date
"JAN. 1.2008",
press it twice to display the time and press it again to
display both time and date on the screen.
•
•
•
•
•
•
•
initial setting:display menu setting
Move
Select
Exit
LCD Bright
LCD Color
Date/Time
TV Display
Camera Mode
MENU
Display
Guideline
✔
Off
Date
Time
Date&Time
BATT.
CHG
MODE
TAPE
CARD
AV
DV
BATT.
MENU
W
T
MODE
POWER
CHG
Move
Select
Exit
LCD Bright
LCD Color
Date/Time
TV Display
Camera Mode
MENU
Display
Guideline
�
Off
�
Off
�
On
(SC-D383/D385 only)