Samsung EV-NXF1ZZB1QUS - Manual (Page 91)

90
Shooting Functions >
Flash
90
Shooting Functions >
Flash
Shooting Functions
In order to capture a realistic photo of a subject, the amount of light
should be constant. When the light source varies, you can use a flash and
supply a constant amount of light. Select appropriate settings according to
a light source and a subject.
To set flash options,
In Shooting mode, press [m] ĺ b ĺ Flash ĺ
an option.
Icon Description
Off: Do not use the flash.
A
Smart Flash: The camera automatically adjusts the brightness
of the flash according to the amount of light in the surrounding
environment.
A
Auto: The flash automatically fires in dark places.
Auto Red-eye: The flash automatically fires and reduces red-eyes.
Fill in: The flash fires whenever you capture a photo. (Brightness is
automatically adjusted.)
Fill-in Red: The flash fires whenever you capture a photo and
reduces red-eyes.
1st Curtain: The flash fires
immediately after the shutter opens.
The camera captures a photo of a
subject earlier in an action sequence
clearly.
Ball moving direction
Icon Description
2nd Curtain: The flash fires just
before the shutter closes. The
camera captures a photo of a
subject later in an action sequence
clearly.
Ball moving direction
‡ The available options may differ depending on shooting conditions.
‡ There is an interval between two bursts of the flash. Do not move until the
flash fires a second time.
‡ If you select Off, the flash does not fire even when an external flash is
attached.
‡ For some lenses, the lens may block the light from the internal flash. If this
occurs, use an optional external flash.
‡ If you attach a lens other than the one provided, using a lens mount adapter,
no flashes will fire.
Use only Samsung-approved flashes. Using incompatible external flashes may
damage your camera.
Flash