Samsung EV-NXF1ZZB1QUS - Manual (Page 136)

135
Wireless network >
Using Auto Backup to send photos or videos
4 Select OK.
‡ To cancel sending, select Cancel.
‡ You cannot select individual files to backup. This function backs up
only new files on the camera.
‡ The backup's progress will be shown on the PC monitor.
‡ When the transfer is completed, the camera will turn off
automatically in approximately 30 seconds. Select Cancel to return
to the previous screen and prevent the camera from turning off
automatically.
‡ To turn off your PC automatically after the transfer is complete,
select Shut down PC after backup.
‡ To change the backup PC, select Change PC.
‡ When you connect the camera to the WLAN, select the AP that is connected
to the PC.
‡ The camera will search for available access points even if you are connecting
to the same access point again.
‡ If you turn off the camera or remove the battery while sending files, the file
transfer will be interrupted.
‡ While you are using this feature, the shutter control is disabled on your
camera.
‡ You can connect only one camera to the PC at a time for sending files.
‡ The backup may be canceled due to network conditions.
‡ When there are no files in the camera memory, you cannot use this feature.
‡ You must turn off Windows Firewall and any other firewalls before using this
feature.
‡ You can send up to 1,000 recent files.
‡ On the PC software, the server name must be entered in the Latin alphabet
and can contain no more than 48 characters.