Samsung EV-NXF1ZZB1QUS - Manual (Page 52)

My Camera >
Accessories
51
Connecting the external flash
1 Open the external flash port cover.
2 Mount the flash by inserting it firmly into the external flash
port.
‡ Hold the external flash port cover open with your finger.
3 Lock the flash into place by turning the flash fastening dial as
shown in the illustration.
‡ The available options may differ depending on the shooting mode.
‡ There is an interval between two bursts of the flash. Do not move until the
flash fires a second time.
‡ Do not remove the flash forcefully. Doing so may damage the flash and
camera.
‡ Use only Samsung-approved flashes. Using incompatible flashes may damage
your camera.