Samsung EV-NXF1ZZB1QUS - Manual (Page 144)

143
Wireless network >
Using Samsung Link to send files
Viewing photos or videos on devices that
support Samsung Link
1 On the Mode screen, select Wi-Fi.
2 Select ĺ Nearby devices.
‡ The camera will automatically attempt to connect to a WLAN via
the most recently connected AP device.
‡ If the camera has not previously been connected to a WLAN, it will
search for available AP devices. (p. 118)
‡ You can set to allow only selected devices or all devices to connect
by pressing [m], and then selecting DLNA Access Control on
the screen.
‡ A sharing file list is created. Wait until other devices can find your
camera.
3 Connect the Samsung Link device to a network, and then turn
on the Samsung Link feature.
‡ Refer to your device's user manual for more information.
4 On the camera, allow the Samsung Link device to connect to
your camera.
5 On the Samsung Link device, select a camera to connect to.
6 On the Samsung Link device, browse the shared photos or
videos.
‡ For information about searching for the camera and browsing the
photos or videos on the Samsung Link device, refer to the device's
user manual.
‡ Videos may not play smoothly depending on the type of Samsung
Link device or the network condition.
AP
▲ The camera is connected to a TV that supports Samsung Link via WLAN.