Samsung EV-NXF1ZZB1QUS - Manual (Page 133)

132
Wireless network
Using the Baby Monitor
3 On the camera, select an AP from the list, and then position
the camera.
‡ Place the camera in a safe location where children or pets cannot
reach it.
‡ Point the camera lens at the subject.
‡ We recommend you connect the camera to a power outlet with the
AC adapter.
4 On the smart phone, select the AP that the camera is
connected to.
‡ For iOS devices, turn on the Wi-Fi feature before turning on the
application.
5 On the smart phone, turn on the Samsung Home Monitor
application.
Use the Baby Monitor feature to connect the camera to a smart phone on
which the Samsung Home Monitor is installed, and monitor a location.
‡ The Baby Monitor feature is supported by smart phones that support WVGA
(800X480) or higher resolution and run the Android OS or iOS. (Some features
may not be supported by some models.) Before using this feature, update the
device’s firmware to the latest version. If the firmware version is not the most
recent, this function may not perform properly.
‡ You should install the Samsung Home Monitor application on your smart
phone before using this feature. You can download the application from
Samsung Apps, the Google Play Store, or the Apple App Store.
‡ Use this feature indoors only.
1 On the Mode screen, select Wi-Fi.
2 On the camera, select .
‡ If the pop-up message that prompts you to download the
application appears, select Next.