Samsung SC-D383-XAP - Manual (Page 61)

臺灣 _57 57_ English
使用數位縮放來放大和縮小 ( DIGITAL ZOOM)
最大程度的 Digital Zoom 僅可在 Camera 模式下操作。 ➥ 第 18 頁
如果您想在錄製時放大至高於 34 倍（預設設定）的級別、可選擇最
大縮放桿。可透過光學方式執行高達 34x 的縮放、並透
過數位方式執行高達 1200 倍的縮放。
畫面品質可能因為您對主體的數位放大程度而降低。
選擇 Digital Zoom
1. 將選擇開關設定為 TAPE。（僅適用於 SC-D383/
D385）
2. 按下 MODE 按鈕以設定 Camera ( ).
3. 按下 MENU 按鈕。
將會顯示選單清單。
4. 向上或向下移動 Joystick (▲ / ▼) 以選擇
"Camera"、然後按下 Joystick 或向右移動
Joystick ().
5. 向上或向下移動 Joystick (▲ / ▼) 以選擇
"Digital Zoom"、然後按下 Joystick。
6. 向上或向下移動 Joystick (▲ / ▼) 以選擇所需
的縮放值 "Off"、"100x"、"200x"、"400x" 或
"1200x"、然後按下 Joystick。
"Off" : 只有光學縮放可高達 34x。
7. 要結束、可按下 MENU 按鈕。
向上或向下移動 Joystick (▲ / ▼) 或移動縮放
杆以使用數位縮放。
將會出現數位縮放指示器。
最大程度的數位縮放可能導致較低的畫面品質。
您不能在以下模式中設定 Digital Zoom 模
式。請首先解除這些功能以設定數位縮放
模式： "EASY.Q"、"Mosaic"、"Mirror"、
"Emboss2"、"Pastel1"、"Pastel2"、"DIS"
數位縮放模式在以下情況下不會操作：
- 膠片照片錄製（在錄影帶上錄製相片影像時）
- 使用
"EASY.Q"、"Mosaic"、"Mirror" 、
"Emboss2"、"Pastel1"、"Pastel2" 或
"DIS" 模式時。
在使用 Digital Zoom 模式時設定 DIS 模式、
將會解除 Digital Zoom 模式。
在使用 Digital Zoom 模式時、不能設定 C.Nite
模式。
•
•
•
•
•
•
•
•
•
•
•
•
ZOOMING IN AND OUT WITh DIGITAL ZOOM
(DIGITAL ZOOM)
Maximum Digital Zoom works only in Camera mode. ➥page 18
You can select the maximum zoom level in case you want to zoom to
a level greater than 34x (the default setting) during
recording. Up to 34x zoom is performed optically, and
after that, up to 1200x zoom is performed digitally.
The picture quality may deteriorate depending on how
much you digitally zoom in on the subject.
Selecting the Digital Zoom
1. Set the Select switch to TAPE. (SC-D383/D385 only)
2. Press the MODE button to set Camera ( ).
3. Press the MENU button.
The menu list will appear.
4. Move the Joystick (▲ / ▼) up or down to select
"Camera", then press the Joystick or move the
Joystick () to the right.
5. Move the Joystick (▲ / ▼) up or down to select
"Digital Zoom", then press the Joystick.
6. Move the Joystick (▲ / ▼) up or down to select the
desired zoom value "Off", "100x", "200x", "400x"
or "1200x", then press the Joystick.
"Off": Only optical zoom is available up to 34x.
7. To exit, press the MENU button.
Move the Joystick (▲ / ▼) up or down, or move
the Zoom lever to use the digital zoom.
The digital zoom indicator appears.
Maximum digital zooming may result in lower
picture quality.
You cannot set the Digital Zoom mode in the
following modes. Please release these functions fi rst
to set the Digital Zoom mode: "EASY.Q", "Mosaic",
"Mirror", "Emboss2", "Pastel1", "Pastel2", "DIS"
The Digital Zoom mode does not work as following
situations:
- Tape Photo Recording (During recording a
photo image on a tape)
- While "EASY.Q", "Mosaic", "Mirror",
"Emboss2", "Pastel1", "Pastel2" or "DIS" mode
is in use.
When you set the DIS mode while Digital Zoom
mode is in use, Digital Zoom mode will be released.
You cannot set the C.Nite mode while the Digital
Zoom mode in use.
•
•
•
•
•
•
•
•
•
•
•
•
16:9 Wide
C.Nite 1/30
16BIt S
10Sec
No Tape !
12:00 1.JAN.2008
29
1/50
M
60min
0:00:10 SP STBY
W T
16:9 Wide
Move Select Exit
Digital Zoom
C.Nite
Light
Camera Mode
MENU
BLC
Camera
Off
100x
✔ 200x
400x
1200x
BATT.
CHG
MODE TAPE CARD
(SC-D383/D385 only)
Move Select Exit
White Balance
Visual Effect
16:9 Wide
Macro
DIS
Camera Mode
MENU
Camera
Program AE � Auto
� Auto
� Off
� On
� Off
� Off