Samsung SC-D383-XAP - Manual (Page 29)

臺灣 _5 5_ English
時鐘設定功能可在 Camera / Player / M.Cam /
M.Player 模式下操作。 ➥ 第 18 頁
遙控功能可以讓您啟用或停用攝錄放影機的遙控器。
1. 將選擇開關設定為 CARD 或 TAPE。（僅適用於
SC-D385）
. 按下 MODE 按鈕以設定 Camera ( ) 或 Player
( ).
3. 按下 MENU 按鈕。
將顯示選單清單。
4. 向上或向下移動 Joystick ( ▲/▼ ) 以選擇
"System"、然後按下 Joystick 或向右移動
Joystick ().
5. 向上或向下移動 Joystick ( ▲/▼ ) 以選擇
"Remote"、然後按下 Joystick。
6. 向上或向下移動 Joystick ( ▲/▼ ) 以選擇 "On"
或 "Off"、然後按下 Joystick。
7. 要結束、可按下 MENU 按鈕。
若您在選單中將 "Remote" 設定為 "Off"、並
嘗試使用它、 LCD 螢幕上的遙控器指示燈
( ) 將會閃爍 3 秒後消失。
•
•
•
設定無線遙控器接收( REMOTE)（僅適用於SC-D382/
D385）
The remote function works in Camera / Player /
M.Cam / M.Player modes. ➥page 18
The remote function allows you to enable or disable
the remote control for use with the camcorder.
1. Set the Select switch to CARD or TAPE.
(SC-D385 only)
2. Press the MODE button to set Camera ( ) or
Player ( ).
3. Press the MENU button.
The menu list will appear.
4. Move the Joystick (▲ / ▼) up or down to select
"System", then press the Joystick or move the
Joystick ()to the right.
5. Move the Joystick (▲ / ▼) up or down to select
"Remote", then press the Joystick.
6. Move the Joystick (▲ / ▼) up or down to select
"On" or "Off", then press the Joystick.
7. To exit, press the MENU button.
If you set the "Remote" to "Off" in the menu
and try to use it, the remote control indicator
( ) will blink for 3 seconds on the LCD
screen and then disappear.
•
•
•
SETTING THE WIRELESS REMOTE CONTROL
ACCEPTANCE (REMOTE) (SC-D382/D385 only)
Move Select Exit
Remote
Beep Sound
Shutter Sound
Language
Demonstration
Camera Mode
MENU
System
Clock Set
� On
� On
� On
� English
� On
Move Select Exit
Remote
Beep Sound
Shutter Sound
Language
Demonstration
Camera Mode
MENU
System
Clock Set
Off
✔ On
BATT.
CHG
MODE TAPE CARD
AV DV
BATT.
MENU
W
T
MODE
POWER
CHG
(SC-D385 only)