Samsung SC-D383-XAP - Manual (Page 45)

臺灣 _41 41_ English
使用 FADE ON 和關閉
淡化功能僅可在 Camera 模式下操作。➥ 第 18 頁
透過使用特殊效果、您可使您的錄製看起來更專業、
如在錄製順序開始時使用淡入或在順序結束時使用
淡出。
開始錄製
1. 將選擇開關設定為 TAPE。（僅適用於 SC-D383/
D385）
. 按下 MODE 按鈕以設定 Camera ( ).
3. 在錄製之前、請按下 Joystick 然後向右移動
Joystick ()
將 Joystick () 移至右側的淡化功能以選擇
"Fade On"。
4. 按下錄製開始 / 停止按鈕、同時解除淡化功能。
錄製開始、畫面及音效會漸漸出現。（淡入）
若要停止錄製
5. 若想使用淡出功能停止錄製、可按下 Joystick、然
後向右移動 Joystick ()
將 Joystick () 移至右側的淡化功能以選擇
"Fade On"。
6. 按下錄製開始 / 停止按鈕以
停止錄製。
畫面和音效會漸漸消失。
（淡出）
•
•
•
•
•
•
USING THE FADE ON AND OFF
The Fade function works only in Camera mode.
➥ page 18
You can give your recording a professional look
by using special effects such as fade in at the
beginning of a sequence or fade out at the end of a
sequence.
To Start Recording
1. Set the Select switch to TAPE.
(SC-D383/D385 only)
2. Press the MODE button to set Camera ( ).
3. Before recording, press the Joystick and then
move the Joystick () to the right.
Move the Joystick () to the right fade function
to select "Fade On".
4. Press the Recording start/stop button and at the
same time release the Fade function.
Recording starts and the picture and sound
gradually appear. (Fade In)
To Stop Recording
5. When you want to stop recording with fade out,
press the Joystick, then move the Joystick ()
to the right.
Move the Joystick () to the right fade function to select
"Fade On".
6. Press the Recording
start/stop button to stop
recording.
The picture and sound
gradually disappear.
(Fade Out)
•
•
•
•
•
•
Fade Out (Approx. 4 seconds)
Fade In (Approx. 4 seconds)
MODE POWER
CHG
VO L
MENU
10Sec
16Bit S
60min
0:00:00 SP STBY
Fade On
Fade On
10Sec
16Bit
C.Nite 1/30
S
60min
0:00:00 SP STBY