Campbell Scientific TGA100 Trace Gas Analyzer Manual - Manual (Page 114)

114
Other Device Data to Save To Disk, Page 5
-----------------------
[ ] Other Device 1 (graph: 0.00 to 10.00 )
[ ] Other Device 2 (graph: 0.00 to 10.00 )
[ ] Other Device 3 (graph: 0.00 to 10.00 )
[ ] Other Device 4 (graph: 0.00 to 10.00 )
[ ] Other Device 5 (graph: 0.00 to 10.00 )
[ ] Other Device 6 (graph: 0.00 to 10.00 )
[ ] Other Device 7 (graph: 0.00 to 10.00 )
[ ] Other Device 8 (graph: 0.00 to 10.00 )
[ ] Other Device 9 (graph: 0.00 to 10.00 )
[ ] Other Device 10 (graph: 0.00 to 10.00 )
[ ] Other Device 11 (graph: 0.00 to 10.00 )
[ ] Other Device 12 (graph: 0.00 to 10.00 )
[ ] Other Device 13 (graph: 0.00 to 10.00 )
[ ] Other Device 14 (graph: 0.00 to 10.00 )
[ ] Other Device 15 (graph: 0.00 to 10.00 )
Slave Data to Save to Disk
-----------------------
[ ] M/S 1 Conc (graph: 0.00 to 1.00 ppm)
[ ] M/S 2 Conc (graph: 0.00 to 1.00 ppm)
[ ] M/S 3 Conc (graph: 0.00 to 1.00 ppm)
[ ] M/S 4 Conc (graph: 0.00 to 1.00 ppm)
Parameter Menu: Analog Out Selection Parameters
---------------------------------------------
Channel 1: [ 10 Hz Gas Conc ]
Min/Max Data Values: 0.00ppm 1.00ppm
Min/Max DAC Voltage: -10.00 V 10.00 V
Channel 2: [ 10 Hz Gas Conc ]
Min/Max Data Values: 0.00ppm 1.00ppm
Min/Max DAC Voltage: -10.00 V 10.00 V