APC SGI 15000 RAID - Manual (Page 141)

Drive Enclosure Troubleshooting
007-5510-002 127
spindown the drives prior to removal. If this is not possible, we recommend that you perform All steps of
the following procedure to ensure that the drive has stopped prior to removal:
To Insert the Drive Carrier Module
1 Release the carrier handle by sliding the latch backwards.
2 Insert the carrier into the enclosure.
3 Slide the drive carrier, gently, all the way into the enclosure.
4 Cam the drive carrier home. The camming foot on the base of the carrier will engage into a slot in the
enclosure.
5 When the carrier is fully home, close the handle. You should hear a click as the latch engages and holds
the handle closed.
6 Close the enclosure.
8.9 Replacing the DEM
Important The DEM card should only be replaced by trained personnel.