APC SGI 15000 RAID - Manual (Page 130)

116 007-5510-002
7.2.2 I/O Panel LEDs
The I/O Panel LEDs fault and status conditions are shown in Figure 7–1 .
I
Table 7–1 defines the LED indicators incorporated on the I/O module.
Figure 7–1 I/O Panel LEDs
Table 7–1 I/O Module LEDs
LED Color STATU
S Definition
Host Port 1
Expansion Port 1
Host Port 2
Expansion Port 2
Green ON
OFF •Incoming signal is GOOD
•No connection or incorrect connection
Host Port 1
Expansion Port 1
Host Port 2
Expansion Port 2
Amber ON
OFF •Fault
•No faults
I/O Module
OK
Green ON
OFF •properly booted and functioning correctly
internal fault
I/O Module
Fault
Amber OFF
ON •No Faults present
I/O Fault
I/O Module
Identity
Blue ON
OFF •Receiving SES Command
Not receiving SES Command