Kenwood R-K1 - Manual (Page 29)

EN 29
ENGLISH
3 Start playback
÷ Tracks are played in the order they were programmed (in order
of program numbers).
÷ Pressing the 4 key once during program playback skips to
the beginning of the track being played and re-plays it. Press
the 4 key twice to return to the track before the one being
played.
÷ Pressing the ¢ key during program playback skips to the
next track.
÷ The programmed tracks are held in memory even after pro-
grammed playback is stopped.
P 0 2 P G M C l e a r
÷ Each press of the CLEAR key clears the currently last track in
the program.
÷ Tracks cannot be cleared from the program in the middle of
playback.
Clearing programmed tracks
÷ When the system is switched off (to standby mode) or the CD
tray is opened, the program play mode is canceled and all of
the programmed tracks are cleared from the memory.
To stop playback
P 0 2 T 0 8 - 2 : 1 5
Blinking
÷ No track can be added to the program during program play-
back.
P 0 1 T 1 5 - 1 1 : 2 2
Total play time of programmed tracks
P 0 2 T 0 8 P G M S e t
\
÷ Up to 32 tracks can be programmed. When [Program full] is
displayed, no more track can be programmed.
÷ If you make a mistake in track number selection, press the
CLEAR key and retry selection.
÷ The selected track number is added to the end of the program.
To add tracks
Playback of Tracks in Desired Order (Program Playback)
1 Select a track number.
\
Press within 20 sec.
2 Repeat the step 1.
To clear the last track in the program:
Press in stop mode
To clear all tracks in the program:
Press in stop mode
Enter the
selection