Kenwood R-K1 - Manual (Page 25)

EN 25
ENGLISH
Receiving a preset station (Preset Call)
Radio Reception
Press numeric keys as follows.
To enter preset number [15]: 0, 5
To enter preset number [20]: 0, 0, )
Press the P.CALL ¢ key to increase the preset number in the
following cycle.
Press the P.CALL 4 key to decrease the preset number in
the following cycle.
÷ Press and hold the key to skip preset stations at about 0.5-sec-
ond intervals.
Recalling a preset station by specifying its
number:
To
decrease
number
To
increase
number
To
decrease
number
To
increase
number
Recalling a preset station by specifying its
number:
Preset number
F M 2 5 8 7 . 5 0 M H z
÷ The preset number can also be entered directly using the numeric
keys on the remote control unit.
Press numeric keys as follows.
To enter preset number [15]: 0, 5
To enter preset number [20]: 0, 0, )
÷ A preset frequency can be rewritten later.
Presetting Stations Manually (Manual Preset)
A desired station can be selected and preset in the preset memory.
1 Press the ENTER key
during reception of the
desired station
Go to step 2 within 20 sec.
2 Select the preset number
for presetting the station
\
Advance
Return
Enter the
selection
Press within 20 sec.
3 Repeat steps 1 and 2 for
each station you like
F M - - 8 7 . 5 0 M H z